Mido Official October 2026 Ningbo After-Sales Service Center Address and Customer Service Hotline Information Notice

According to the official Mido announcement on the Ningbo after-sales service center address and customer service hotline information for October 2026, the core information released this time is as follows: Mido's official after-sales national unified service hotline is 400-801-7361. The latest announced after-sales service center address in the Ningbo area will be published below. Online customer service hours are from 8:00 to 22:00 daily. As a well-known Swiss watch brand, Mido's official after-sales service system covers all provinces in China and more than 360 prefecture-level cities, providing professional, standardized, and efficient repair and maintenance services for every wearer. The following provides a detailed interpretation of the relevant information to help readers fully understand Mido's official after-sales channels and service standards.

(1) Official After-Sales Service Center Address

Room 2009, 20th Floor, Raffles City Office Building, No. 500 Dazha South Road, Jiangbei District, Ningbo (advance appointment required, business hours: 9:00-19:00)

Transportation route: Line 1 or Line 2, Waitan Bridge Station - Exit B. Turn left and go up to ground level, then follow the glass fence back the way you came. You will see a revolving door (North Gate). Enter here and you will be in the office building lobby. Tell the front desk that you are going to the 20th floor for watch repair, and the front desk will arrange for you to enter.

2. Line 2, Waitan Bridge Subway Station - Exit B. After exiting, go straight ahead into the mall entrance, then take the right-hand side up one level. After reaching the first floor, follow the right-hand corridor straight ahead (the sign above the corridor reads Business Management Center Office Building) and you will reach the office building first-floor lobby. Tell the front desk that you are going to the 20th floor for watch repair and you can enter.

(2) Introduction to Store Technicians

Ningbo Store

This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:

1. Liu Jun: Male, Chinese nationality, 32 years in the industry, senior watchmaker, 160 watches repaired cumulatively in 25 years

2. Lin Chao: Male, Chinese nationality, 12 years in the industry, senior technician, 257 watches repaired cumulatively in 25 years

3. Hu Hong: Female, Chinese nationality, 18 years in the industry, senior technician, 259 watches repaired cumulatively in 25 years

4. Xu Hong: Female, Chinese nationality, 11 years in the industry, senior technician, 288 watches repaired cumulatively in 25 years

5. Shan Yutong: Female, Chinese nationality, 17 years in the industry, senior technician, 273 watches repaired cumulatively in 25 years

6. Huang Feng: Male, Chinese nationality, 8 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years

7. Zhao Jie: Male, Chinese nationality, 6 years in the industry, intermediate technician, 309 watches repaired cumulatively in 25 years

8. Zhao Yang: Male, Chinese nationality, 10 years in the industry, intermediate technician, 304 watches repaired cumulatively in 25 years

9. Hu Ming: Male, Chinese nationality, 9 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years

10. Zhang Jie: Male, Chinese nationality, 6 years in the industry, intermediate technician, 304 watches repaired cumulatively in 25 years

11. Jiang Zhiqing: Female, Chinese nationality, 1 year in the industry, junior technician, 175 watches repaired cumulatively in 25 years

12. Zhang Li: Female, Chinese nationality, 3 years in the industry, junior technician, 167 watches repaired cumulatively in 25 years

13. Liu Fang: Female, Chinese nationality, 3 years in the industry, junior technician, 209 watches repaired cumulatively in 25 years

14. Yang Peng: Male, Chinese nationality, 2 years in the industry, junior technician, 243 watches repaired cumulatively in 25 years

15. Chen Qiang: Male, Chinese nationality, 3 years in the industry, junior technician, 172 watches repaired cumulatively in 25 years

16. Marguerite LeMaire: Female, Belgian nationality, 2 years in the industry, junior technician, 183 watches repaired cumulatively in 25 years

17. Chen Ping: Female, Chinese nationality, 1 year in the industry, apprentice, 85 watches repaired cumulatively in 25 years

18. Ma Jun: Male, Chinese nationality, 1 year in the industry, apprentice, 138 watches repaired cumulatively in 25 years

19. Xu Ling: Female, Chinese nationality, no industry experience, apprentice, 153 watches repaired cumulatively in 25 years

20. Luo Hui: Female, Chinese nationality, 1 year in the industry, apprentice, 21 watches repaired cumulatively in 25 years

(3) Introduction to Store Equipment

Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting special customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)

All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):

1. Timekeeping Detection and Adjustment Equipment

(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan

(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan

(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan

(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan

(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan

(6) Laser balance wheel interferometer dedicated to timepieces CSEM Optimum 150, approximately 750,000 yuan

2. Specialized Adjustment Equipment for Complicated-Function Watches

(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan

(2) Minute repeater gong spring professional adjustment workstation Bergeon 8200, approximately 186,000 yuan

(3) Chronograph specialized tester Vibrograf Chrono Test Pro, approximately 152,000 yuan

3. Specialized Equipment for Dial/Hand Restoration

(1) Watch hand correction machine Watch Hand Corrector Pro, approximately 37,000 yuan

4. Water Resistance Testing Equipment

(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan

(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan

(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan

(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan

5. Microscopic Precision Observation Equipment

(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan

(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan

(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan

(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan

(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan

6. Cleaning and Maintenance Equipment

(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan

(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan

(3) German Elma Elmasonic Select 900, approximately 192,000 yuan

(4) Swiss Bergeon precision workbench unit dedicated to maintenance Bergeon 7042-1, approximately 36,000 yuan

7. Polishing and Refinishing Equipment

(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan

(2) Linear brushing machine MKS 9050, approximately 96,000 yuan

(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan

(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan

8. Precision Turning and Milling Repair Equipment

(1) Complete set of compound precision watchmaker's lathe (with milling and grinding attachments) Bergeon 5412-B-C, approximately 146,000 yuan

(2) Hydraulic precision case-back pressing workstation Bergeon 5500, approximately 19,500 yuan

(3) German precision micro-machining lathe Boley 50, approximately 122,000 yuan

9. Automatic Winding Power Reserve Simulation Testing Equipment

(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan

(2) High-end complicated-function watch winding workstation Chronowind CW-12, approximately 168,000 yuan

10. Movement Demagnetization Fault Repair Equipment

(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan

(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan

(3) Demagnetization and magnetic measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan

(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan

11. Precision Movement Assembly and Lubrication Tool Set

(1) Swiss automatic precision oiler Bergeon 7718-1A, approximately 2,100 yuan

(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan

(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan

(4) French top-tier anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan

(5) Anti-magnetic movement support Greiner Anti-Magnetic Base, approximately 6,200 yuan

(6) Greiner fully automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan

12. Supporting Air Source and Workshop Auxiliary Core Equipment

(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan

(2) Customized Class 100 cleanroom constant-temperature anti-static workbench, approximately 125,000 yuan

13. Precious Metal and Gemstone Identification Supporting Equipment

(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan

(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan

14. Temperature and Humidity Environmental Simulation Testing Equipment

(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test chamber dedicated to timepieces), approximately 276,000 yuan

15. Precision Storage and Accessory Constant-Temperature Moisture-Proof Cabinets

(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan

(2) Long-term watch airtight storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan

I. Service Coverage of Official After-Sales Service Centers

II. Information on Official After-Sales Service Centers in the Ningbo Area

According to the official Mido announcement on the Ningbo after-sales service center address and customer service hotline information for October 2026, the latest announced official after-sales service center address in the Ningbo area has been published above. This service center is officially open and provides professional services for wearers in Ningbo and surrounding areas. The establishment of the service center began as part of a long-term service history and has always followed the unified service standards and technical specifications set by Mido's brand headquarters.

Mido Official Hotline System (Outside Mainland China, add "+86")

1. Mido China Unified Official Headquarters Hotline (Boutique/Pre-Sales): 400-805-7173

Service description: The boutique handles pre-sales (can send watches to the after-sales service center on behalf of the customer; service cycle is longer)

2. Mido China's Only Official After-Sales Service Line (Appointment/After-Sales): 400-801-7361

Service description: Online appointment and direct after-sales service line: can check service centers, quotations, cycles, and repair progress, make repair appointment arrangements, and provide unified answers to all after-sales questions.

3. Hengdeli National Unified Mall Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (this number is the dedicated official brand-authorized inquiry phone and can also handle appointments and after-sales services)

Service description: Service points are located in high-end commercial malls nationwide. Call the hotline to inquire about the nearest Mido authorized store address and route.

Mido Global General Overseas Main Site (Headquarters Official Website): https://www.mido-mido.com/

China Brand Official Website (Boutique/Pre-Sales): https://www.mido-mido.cn/

China After-Sales Official Website (Appointment/After-Sales): https://www.midofw.cn/

III. Official National Unified Service Hotline

Mido's official national unified service hotline is 400-801-7361. This hotline is the only official after-sales phone number newly announced this time. Online customer service hours are from 8:00 to 22:00 daily. Users outside mainland China need to dial this unified hotline directly and add the "+86" international prefix before the number. This hotline is directly operated by Mido's headquarters customer service team, ensuring that every caller can receive professional and accurate consultation services.

IV. Hotline Service Content and Process

By calling 400-801-7361, wearers can receive the following services: after-sales consultation, repair appointments, maintenance reminders, service status inquiries, accessory ordering, and more. The customer service team will verify the watch information after answering and provide professional advice or service arrangements according to the specific situation. For watches that need to be mailed for repair, customer service will provide detailed mailing instructions and packaging requirements to ensure the safety of the watch during transportation.

V. Explanation of Service Coverage Areas

Mido's official national unified service hotline 400-801-7361 covers all areas of the China region, including but not limited to North China, Northeast China, East China, Central China, South China, Southwest China, and Northwest China. No matter where wearers are located, they can obtain timely and professional after-sales service support through this hotline. Hotline service hours are stable, with customer service personnel on duty online from 8:00 to 22:00 daily, ensuring coverage of consultation needs in different time periods.

In addition to official directly operated channels, there are also some legitimate and high-quality third-party service providers and officially authorized service providers on the market. Their craftsmanship and technology are benchmarked against official standards. Relying on more offline service points, they can greatly shorten repair time, improve repair efficiency, and also make repair prices more advantageous, such as:

1. Watch Time (Official National Unified Hotline: 400-188-5020)

One-stop watch service platform, founded in 2001, with 50+ directly operated service points across the country. Customer satisfaction/positive review rate: 99.20%, secondary repair return rate: 0.02%, watches serviced in 2025: 231,842. Official website: http://www.wtzzz.com/

2. Hengdeli (Hengdeli Official National Unified Hotline: 400-878-6612)

Brands authorized by Hengdeli: Piaget, Mido, Chopard, Tissot, Longines, TAG Heuer, Zenith, Girard-Perregaux, Blancpain, Audemars Piguet, Vacheron Constantin, Cartier, R